OEM BMW Propeller Shaft Center Support Bearing Factory

Home / Products / Driveshaft Support Bearing / BMW Drive Shaft Support Bearing

Custom BMW Drive Shaft Support Bearing Manufacturers

Business For 17 Years
ABOUT LIANJUN
Anhui Lianjun Rubber Technology Co., LTD., formerly Wenzhou Lianjun Vehicle Parts Co., LTD., was founded in 2009, referred to as "Lianjun Rubber". Lianjun Rubber is located in Ningguo city, Anhui province—automobile NVH rubber damper production base, the factory covers an area of 13,000 square meters, close to Hangzhou city (less than 100km).Lianjun Rubber focusing on NVH rubber damper elements of R&D, manufacturing and sales for Mercedes-Benz and BMW chassis systems. Anhui Lianjun Rubber Technology Co., LTD. is China custom BMW Propeller Shaft Center Support Bearing Manufacturers and BMW Drive Shaft Support Bearing Factory, we offer BMW Driveshaft Carrier Bearing Replacement for sale.Its main products are Engine mounts, Drive shaft support bearing, Transmission mounts, Support drive shaft, Sturt mounts, Bushing and other series of auto rubber material products, nearly 1000 specifications. Lianjun Rubber is committed...
MORE ABOUT US
  • AREA
    0

    Established in 2009

  • AREA
    0㎡

    Floor area

  • HAVE
    0

    Product Specifications

V I E W  V I D E O
Certificate Of Honor
News
BMW Drive Shaft Support Bearing Industry knowledge

Anhui Lianjun Rubber Technology Co., LTD. is a China-based NVH rubber damper manufacturer supplying the BMW Drive Shaft Support Bearing programme from our 13,000 m² production site in Ningguo, Anhui. We focus on BMW propeller shaft centre support bearings, bridge bearings and carrier bearing assemblies for aftermarket distribution, importing brands and workshop supply channels.

The programme covers OE-cross-referenced parts for E34, E39, E46, E53, E61, E84, E90, F07, F10, F15, F25 and related BMW 3, 5, 6, 7 and X series chassis. This category sits within our wider chassis driveline range, alongside Driveshaft Flex Disc Kit and the parent Driveshaft Support Bearing portfolio.

BMW Drive Shaft Support Bearing Range

The table below shows a representative portion of the current programme. The full category extends across multiple pages and is matched by OE part number, chassis application and bracket configuration.

Reference BMW Application OE Cross Reference Configuration Type
LJ-177 BMW 5 Series E34 chassis 26121226723 / 26121225774 / 26121226415 Center support bearing
LJ-373 BMW 7 Series 26127513218 / 26127513318 Rubber dampening center support bearing
LJ-386 BMW 5 Series E34 / E39 26121226731 / 26121229089 Drive shaft center support bearing
LJ-476 BMW X5 E53 chassis 26121229726 / 26127507740 Drive system center support bearing
LJ-477 BMW 3 Series E46 chassis 26121229492 / 26127501257 Hanging rubber bearing
LJ-566 BMW X1 E84 AWD 26127526631 / 26128615621 Drive shaft support bearing assembly
LJ-601 BMW E46 3 Series 26122282496 / 26127501258 / 26127506783 Drive shaft hanging rubber bearing
LJ-735 BMW E90 5 / 6 / 7 Series 26127564695 Driveshaft center support bearing
LJ-881 BMW X Series AWD 26127558745 Drive shaft center support bearing
LJ-930 BMW 5 Series F07 / 535 26117589746 / 26128686120 Drive shaft center support bracket bearing

Design and Material Selection for Driveline NVH

BMW centre support bearings operate in a demanding environment where radial load, axial movement, driveline angle and underbody heat are present. Our production focus is on the correct relationship between the rubber isolator, bearing bore and bracket geometry. We control the rubber-to-metal bond, the bearing press fit and the alignment of the mounting holes so that the part can be installed without altering the propshaft working angles.

  • Rubber isolator tuned for the required axial and radial stiffness across the chassis application.
  • Bearing seat and bracket produced to match OE mounting faces and hole patterns.
  • Dust cover and sealing features retained for contaminated road environments.
  • OE number matching confirmed before release for each batch.

Supply, Packaging and Quality Control

Our manufacturing system covers rubber mixing, metal preparation, moulding, bearing assembly and final inspection within the same factory footprint. The quality system reflects ISO9001-based process control and supports small-batch trials, free sample evaluation and scheduled export deliveries. For BMW support bearing orders we prepare parts with the following supply options:

  • Neutral packaging, private-label boxes or customer-specific barcoding after approval.
  • Bulk, single-box or set-based packaging according to the distribution channel.
  • Free samples for initial evaluation where the customer is qualifying a new reference.
  • Consistent batch traceability linked to the LJ part reference and OE number.

Integration with the Wider BMW Chassis Programme

Because a failing propshaft support bearing is often replaced together with the adjacent flexible coupling or mounting hardware, our range is designed to be specified inside a wider driveline service kit. We coordinate the support bearing with Driveshaft Flex Disc Kit, transmission mounts and related Transmission Mount references so procurement teams can consolidate part numbers under one shipment.

Information We Use to Configure Your Solution

For a fast and accurate proposal, we need the following data:

  • BMW chassis code or model year range, or the OE reference printed on the existing part.
  • Whether the required item is a complete bearing and bracket assembly or the rubber isolator only.
  • Annual volume and initial trial quantity.
  • Packaging, brand and barcode expectations.
  • Preferred delivery terms and destination.

Frequently Asked Questions

Which BMW chassis does the range cover?

The current programme includes E34, E39, E46, E53, E61, E84, E90, F07, F10, F15, F25 and selected X-series applications, matched by OE part number and chassis.

Can you supply under private label or neutral packaging?

Yes. We can provide neutral packaging, private-label boxes or customer-specific barcoding after the packaging artwork and part references are approved.

Do you provide free samples for evaluation?

Free samples are available for qualified evaluation. Sample availability is confirmed by the customer service team based on the requested reference.

How should we specify a new BMW support bearing enquiry?

Send the BMW chassis code or OE number, the required configuration type and the expected annual quantity. We will confirm the matching LJ reference, packaging scope and delivery schedule.

Can the support bearing be combined with other driveline parts in one shipment?

Yes. The support bearing can be ordered together with flex discs, transmission mounts and other required driveline references to consolidate shipment and simplify customs documentation.