Heavy-Duty Trailing Arm Bushing for Mercedes-Benz

Home / Products / Bushing / Mercedes-Benz Suspension Bushing / Heavy-Duty Trailing Arm Bushing for Mercedes-Benz

Heavy-Duty Trailing Arm Bushing for Mercedes-Benz

OE Numbers:
4603300111 | A4603300111
4603330314 | A4603330314
4603335014 | A4603335014

Compatible Vehicle Series:
Mercedes-Benz (Imported) G-Class

Contact Us
PREV：Premium Control Arm Bushing for Mercedes-Benz NEXT：Durable Rubber-to-Metal Control Arm Bushing for Mercedes-Benz
  • Description
  • Advantages
  • Suitable For
  • Contact Us

This is a drawbar bushing specifically designed for heavy-duty tasks, primarily compatible with all Mercedes-Benz (imported) G-Class models. During off-road driving, the drawbar endures severe vertical movement and longitudinal impacts. This bushing's function is to stabilize the rear axle geometry, ensuring efficient and smooth power transmission. It's a professional-grade repair solution for typical problems in older G-Class vehicles, such as chassis loosening and swaying when crossing bumps, meeting military-grade or extreme off-road strength requirements.

Key specifications are accurate to 70mm x 16mm x 50mm x 40mm. The product uses a reinforced metal frame, and the outer wrapping layer has undergone fatigue-resistant compression treatment, ensuring sufficient support even under extreme compression and preventing hard contact between metal parts.

 The bushing's heavy-duty design effectively locks the drawbar position during sudden braking or steep climbs, preventing unnecessary lateral movement of the rear axle. Compared to standard parts, it offers over 30% improvement in wear resistance and compression resistance, significantly reducing chassis resonance frequency and enhancing cabin quietness. For vehicles that are constantly under heavy loads or equipped with external spare tires or off-road gear, this bushing provides longer-lasting protection, preventing uneven tire wear and excessive shock absorber load caused by bushing failure.

Recommended Products

Business For 17 Years
ABOUT LIANJUN
Anhui Lianjun Rubber Technology Co., LTD., formerly Wenzhou Lianjun Vehicle Parts Co., LTD., was founded in 2009, referred to as "Lianjun Rubber". Lianjun Rubber is located in Ningguo city, Anhui province—automobile NVH rubber damper production base, the factory covers an area of 13,000 square meters, close to Hangzhou city (less than 100km).Lianjun Rubber focusing on NVH rubber damper elements of R&D, manufacturing and sales for Mercedes-Benz and BMW chassis systems. Its main products are Engine mounts, Drive shaft support bearing, Transmission mounts, Support drive shaft, Sturt mounts, Bushing and other series of auto rubber material products, nearly 1000 specifications. Lianjun Rubber is committed...
MORE ABOUT US
  • AREA
    0

    Established in 2009

  • AREA
    0㎡

    Floor area

  • HAVE
    0

    Product Specifications

V I E W  V I D E O
Certificate Of Honor
News
Mercedes-Benz Suspension Bushing Industry knowledge