Engine Mount for Mercedes-Benz Vito W638 CDI 2.2

Home / Products / Transmission Mount / MERCEDES-BENZ Transmission Mount / Engine Mount for Mercedes-Benz Vito W638 CDI 2.2

Engine Mount for Mercedes-Benz Vito W638 CDI 2.2

OE Numbers:
6382660203

Compatible Models:
Mercedes-Benz Vito Box (W638) CDI 2.2
Mercedes-Benz Vito Bus (W638) CDI 2.2

Contact Us
PREV：Engine Mount for Mercedes-Benz Sprinter 3.5t Bus B906 (2006–2018) NEXT：Transmission Mount for Mercedes-Benz S-Class W140/W220, E-Class W210/W211, C-Class W203/W204 & SL/SLK Series
  • Description
  • Advantages
  • Suitable For
  • Contact Us

This engine mount is purpose-designed for the Mercedes-Benz Vito W638 equipped with the OM611 CDI 2.2-litre diesel engine — the most popular powertrain in the W638 range. The OM611 CDI's direct injection and high compression ratio generate distinctive torque pulses at low engine speeds, placing specific isolation demands on the engine mount that differ from the carburetted or early diesel variants.
The single OE reference number 6382660203 confirms a Vito-specific geometry that is not shared with Vito-derived Viano or W639-generation parts. As the W638 CDI ages into high-mileage territory, the engine mount is a primary NVH maintenance item: its replacement typically resolves the low-frequency vibration complaints associated with aged rubber, restoring the OM611's inherently smooth power delivery.

CDI 2.2-specific design for W638 Vito Box and Bus
Matches OM611 CDI torque characteristics for optimal isolation
Single OE reference ensures accurate part selection
Suitable for both short-wheelbase and long-wheelbase W638 body configurations

Eliminates characteristic CDI idle vibration caused by worn rubber
Precise OE geometry prevents engine misalignment on replacement
Cost-effective restoration of W638 CDI NVH quality
Recommended alongside LJ-544 for complete engine mount renewal on W638

Recommended Products

Business For 17 Years
ABOUT LIANJUN
Anhui Lianjun Rubber Technology Co., LTD., formerly Wenzhou Lianjun Vehicle Parts Co., LTD., was founded in 2009, referred to as "Lianjun Rubber". Lianjun Rubber is located in Ningguo city, Anhui province—automobile NVH rubber damper production base, the factory covers an area of 13,000 square meters, close to Hangzhou city (less than 100km).Lianjun Rubber focusing on NVH rubber damper elements of R&D, manufacturing and sales for Mercedes-Benz and BMW chassis systems. Its main products are Engine mounts, Drive shaft support bearing, Transmission mounts, Support drive shaft, Sturt mounts, Bushing and other series of auto rubber material products, nearly 1000 specifications. Lianjun Rubber is committed...
MORE ABOUT US
  • AREA
    0

    Established in 2009

  • AREA
    0㎡

    Floor area

  • HAVE
    0

    Product Specifications

V I E W  V I D E O
Certificate Of Honor
News
MERCEDES-BENZ Transmission Mount Industry knowledge