Engine Mount for Mercedes-Benz Sprinter B906 & Volkswagen Crafter 30–50

Home / Products / Transmission Mount / MERCEDES-BENZ Transmission Mount / Engine Mount for Mercedes-Benz Sprinter B906 & Volkswagen Crafter 30–50

Engine Mount for Mercedes-Benz Sprinter B906 & Volkswagen Crafter 30–50

OE Numbers:
9062411113

Compatible Models:
Mercedes-Benz Sprinter 3-t Bus (B906) 2006–2018
Mercedes-Benz Sprinter 3,5t Bus / Box (B906)
Mercedes-Benz Sprinter 4,6t Box (B906)
Mercedes-Benz Sprinter 5t Box/Chassis (B906)
Volkswagen Crafter 30–50 Box (2E) 2.5 TDI 2006.04–2011.07

Contact Us
PREV：Engine Mount for Mercedes-Benz Vito W638 CDI 2.2 NEXT：Engine Mount for Mercedes-Benz C-Class W203/W204 & E-Class W210/W211/W212
  • Description
  • Advantages
  • Suitable For
  • Contact Us

This engine mount bridges the Mercedes-Benz Sprinter B906 and first-generation Volkswagen Crafter platforms, which share a common powertrain and engine mounting architecture through the joint Sprinter/Crafter development programme. The mount's substantial dimensions (122 × 106 × 110 mm) reflect the heavier-duty role it plays in supporting the 2.5 TDI (Crafter) and OM646/OM651 (Sprinter) engine installations at their maximum payload ratings.

As the highest-volume commercial van platforms in European workshops, the Sprinter B906 and first-gen Crafter generate consistent demand for engine mount replacements. This part addresses the full payload spread — from 3-t bus through to 5-t box — with a single part number, and includes the VW Crafter 2E chassis (BJM/CECB engine codes) that otherwise requires sourcing through the VW parts network.

Dimensions: 122 × 106 × 110 mm for correct chassis clearance
Covers Sprinter B906 (3t to 5t) and VW Crafter 2E (2.5 TDI)
Single OE reference for both Mercedes-Benz and VW platforms
Reinforced rubber element rated for maximum payload engine loads

Cross-platform coverage reduces workshop ordering complexity
Includes VW Crafter fitment otherwise only available from VW dealers
Large rubber volume provides superior vibration isolation under full load
Supports fleet operators running mixed Sprinter/Crafter vehicle pools

Recommended Products

Business For 17 Years
ABOUT LIANJUN
Anhui Lianjun Rubber Technology Co., LTD., formerly Wenzhou Lianjun Vehicle Parts Co., LTD., was founded in 2009, referred to as "Lianjun Rubber". Lianjun Rubber is located in Ningguo city, Anhui province—automobile NVH rubber damper production base, the factory covers an area of 13,000 square meters, close to Hangzhou city (less than 100km).Lianjun Rubber focusing on NVH rubber damper elements of R&D, manufacturing and sales for Mercedes-Benz and BMW chassis systems. Its main products are Engine mounts, Drive shaft support bearing, Transmission mounts, Support drive shaft, Sturt mounts, Bushing and other series of auto rubber material products, nearly 1000 specifications. Lianjun Rubber is committed...
MORE ABOUT US
  • AREA
    0

    Established in 2009

  • AREA
    0㎡

    Floor area

  • HAVE
    0

    Product Specifications

V I E W  V I D E O
Certificate Of Honor
News
MERCEDES-BENZ Transmission Mount Industry knowledge