Wheel Suspension/Control Arm Universal Positioning Bushing for Mercedes-Benz

Home / Products / Bushing / Mercedes-Benz Suspension Bushing / Wheel Suspension/Control Arm Universal Positioning Bushing for Mercedes-Benz

Wheel Suspension/Control Arm Universal Positioning Bushing for Mercedes-Benz

OE Numbers:
1643330414
A1643330414

Compatible Vehicle Series:
MERCEDES-BENZ (W164) (W251, V251)  (166) 
Jeep (Imported) -  Grand Cherokee  IV (WK, WK2) - 3.0 TD V6 4x4  [EXF;EXN]  (2014.04 - )
Jeep (Imported) -  Grand Cherokee  IV (WK, WK2) - 3.6 V6 4x4  [ERB]  (2010.12 - )
Jeep (Imported) -  Grand Cherokee  IV (WK, WK2) - 5.7 V8 4x4  [EZH]  (2010.11 - )
Jeep (Imported) -  Grand Cherokee  IV (WK, WK2) - 6.4 SRT8 4x4  [ESG]  (2011.03 - )
MERCEDES-BENZ (Imported)
MERCEDES-BENZ (Imported) - GL-Class (X164) - GL 320 CDI 4-matic (164.822)  [OM 642.940]  (2006.09 - 2009.05)
MERCEDES-BENZ (Imported) - GL-Class (X164) - GL 350 CDI BlueTEC 4-matic (164.824, 164.825)  [OM 642.820]  (2009.12 - 2012.08)
MERCEDES-BENZ (Imported) - GL-Class (X164) - GL 450 4-matic (164.871)  [M 273.923]  (2006.09 - 2012.08)
MERCEDES-BENZ (Imported) - GL-Class (X164) - GL 500 4-matic (164.886)  [M 273.963]  (2006.09 - 2012.12)
MERCEDES-BENZ (Imported) - M-Class (W164) - ML 300 4-matic (164.182)  [M 272.945]  (2010.03 - 2011.12)
MERCEDES-BENZ (Imported) - M-Class (W164) - ML 350 4-matic (164.186)  [M 272.967]  (2005.02 - 2011.12)
MERCEDES-BENZ (Imported) - M-Class (W164) - ML 350 CDI 4-matic (164.125, 164.124)  [OM 642.820]  (2009.09 - 2011.12)
MERCEDES-BENZ (Imported) - M-Class (W164) - ML 500 4-matic (164.172)  [M 273.963]  (2007.12 - 2011.12)
MERCEDES-BENZ (Imported) - M-Class (W164) - ML 500 4-matic (164.175)  [M 113.964]  (2005.07 - 2006.12)
MERCEDES-BENZ (Imported) - M-Class (W164) - ML 63 AMG 4-matic (164.177)  [M 156.980]  (2006.01 - 2011.12)
MERCEDES-BENZ (Imported) - R-Class (W251, V251) - R 300 L (251.054, 251.154)  [M 272.945]  (2009.03 - 2014.12)
MERCEDES-BENZ (Imported) - R-Class (W251, V251) - R 350 (251.056, 251.156)  [M 272.967]  (2007.01 - 2012.12)
MERCEDES-BENZ (Imported) - R-Class (W251, V251) - R 350 4-matic (251.065, 251.165)  [M 272.967]  (2005.08 - 2012.12)
MERCEDES-BENZ (Imported) - R-Class (W251, V251) - R 350 CGI 4-matic (251.057, 251.157)  [M 276.958]  (2011.10 - 2014.12)
MERCEDES-BENZ (Imported) - R-Class (W251, V251) - R 500 4-matic (251.072, 251.172)  [M 273.963]  (2005.08 - 2014.12)
MERCEDES-BENZ (Imported) - R-Class (W251, V251) - R 500 4-matic (251.075, 251.175)  [M 113.960]  (2005.08 - 2006.12)

Contact Us
PREV：Front Lower Control Arm Rear Silent Block for Mercedes S-Class NEXT：Large Equal-Diameter Support Bushing for Control Arm/Trailing Arm (Mercedes-Benz)
  • Description
  • Advantages
  • Suitable For
  • Contact Us

The Wheel Suspension/Control Arm Universal Positioning Bushing for Mercedes-Benz is designed for hub suspensions or control arm positions with complex geometric specifications. It uses a stepped structure with dual outer diameters (57.5mm and 64.5mm) and dual widths (60mm and 65mm) to adapt to non-standard mounting holes and provide segmented support. The 14.2mm inner diameter ensures universal fastening capability at suspension connection points. This multi-level size design reflects the refined force adjustment requirements of Mercedes-Benz chassis.

Composite Dimension Matrix: Outer diameters of 57.5mm/64.5mm; widths of 60mm/65mm. 
Inner Diameter: Set at 14.2mm. 
Multi-dimensional Parameters: Includes comprehensive 57.5 * 64.5 * 14 reference sizes.
Application Positioning: Suitable for Wheel Suspension and control arms.

Segmented Load Regulation: Achieves different lateral rigidity levels, improving chassis adaptability to various corners. 
Precise Axial Limiting: Tiered width design acts as a physical limit to prevent axial detachment under extreme force. 
Enhanced Connection Stability: The 64.5mm wide end increases bonding strength with the seat hole. 
Special Chassis Adaptability: Developed for complex Mercedes-Benz control arm seat holes, ensuring accurate fitment.

Recommended Products

Business For 17 Years
ABOUT LIANJUN
Anhui Lianjun Rubber Technology Co., LTD., formerly Wenzhou Lianjun Vehicle Parts Co., LTD., was founded in 2009, referred to as "Lianjun Rubber". Lianjun Rubber is located in Ningguo city, Anhui province—automobile NVH rubber damper production base, the factory covers an area of 13,000 square meters, close to Hangzhou city (less than 100km).Lianjun Rubber focusing on NVH rubber damper elements of R&D, manufacturing and sales for Mercedes-Benz and BMW chassis systems. Its main products are Engine mounts, Drive shaft support bearing, Transmission mounts, Support drive shaft, Sturt mounts, Bushing and other series of auto rubber material products, nearly 1000 specifications. Lianjun Rubber is committed...
MORE ABOUT US
  • AREA
    0

    Established in 2009

  • AREA
    0㎡

    Floor area

  • HAVE
    0

    Product Specifications

V I E W  V I D E O
Certificate Of Honor
News
Mercedes-Benz Suspension Bushing Industry knowledge