Wholesale Transmission Mount for BMW 5 Series E34 / 7 Series E32 / 8 Series E31 Factory

Home / Products / Transmission Mount / BMW Transmission Mount / Transmission Mount for BMW 5 Series E34 / 7 Series E32 / 8 Series E31

Transmission Mount for BMW 5 Series E34 / 7 Series E32 / 8 Series E31

OE Numbers:
24711131663
24711130188

Compatible Models:
BMW
5 Series (E34)
7 Series (E32)
8 Series (E31)

Key Dimensions:
Length: 43 / 79 mm
Outer Diameter: 38 / 50 mm
External Thread: M8 x 1.25

Contact Us
PREV：Transmission Mount for BMW 3/5/7 Series (E36/E46/E34/E39/E32/E38) NEXT：Transmission Mount for BMW 1/2/3/4 Series (F20/F21/F30/F31/F80)
  • Description
  • Advantages
  • Suitable For
  • Contact Us

Transmission mount for BMW 5 Series (E34), 7 Series (E32), and 8 Series (E31), covering the larger-bore mount position used on these V8 and straight-six platforms. The 43/79 mm length and 38/50 mm OD profile matches the deeper crossmember used on the heavier E32 and E31 body structures.

• E32 / E31 load rating: Rubber compound hardness uprated versus the E36 item to handle the greater mass of the 7-series and 8-series bodies
• Dual-length format: 43 mm and 79 mm lengths correspond to different crossmember positions on E34, E32, and E31 bodies
• 50 mm outer bore option: Large OD variant seats into the wide-bore crossmember used on V12 E31 850i
• M8 stud retained: Common fastener with E36 / E39 mounts, simplifying tooling requirements
• OEM numbers: 24711131663 / 24711130188

• Correct for V8 E32 730i / 740i and V12 E32 750i, where the smaller E36-specification mount would compress excessively
• Resolves the low-frequency transmission groan under light throttle reported on high-mileage E31 8-series
• Maintains gearbox position critical to gear-selection cable tension on the E32 4-speed automatic
• Preserves correct propshaft angle on E31 variants with the long-ratio rear axle
• Single part covers three body lines, reducing workshop stock while maintaining correct fitment

Recommended Products

Business For 17 Years
ABOUT LIANJUN
Anhui Lianjun Rubber Technology Co., LTD., formerly Wenzhou Lianjun Vehicle Parts Co., LTD., was founded in 2009, referred to as "Lianjun Rubber". Lianjun Rubber is located in Ningguo city, Anhui province—automobile NVH rubber damper production base, the factory covers an area of 13,000 square meters, close to Hangzhou city (less than 100km).Lianjun Rubber focusing on NVH rubber damper elements of R&D, manufacturing and sales for Mercedes-Benz and BMW chassis systems. Anhui Lianjun Rubber Technology Co., LTD. is China Wholesale Transmission Mount for BMW 5 Series E34 / 7 Series E32 / 8 Series E31 Suppliers and Transmission Mount for BMW 5 Series E34 / 7 Series E32 / 8 Series E31 Factory, we offer Transmission Mount for BMW 5 Series E34 / 7 Series E32 / 8 Series E31 for sale. Its main products are Engine mounts, Drive shaft support bearing, Transmission mounts, Support drive shaft, Sturt mounts, Bushing and other series of auto rubber material products, nearly 1000 specifications. Lianjun Rubber is committed...
MORE ABOUT US
  • AREA
    0

    Established in 2009

  • AREA
    0㎡

    Floor area

  • HAVE
    0

    Product Specifications

V I E W  V I D E O
Certificate Of Honor
News