Engine Mount for Mercedes-Benz Vito W638 (S-Class / SL / SLK Powertrain Variants)

Home / Products / Transmission Mount / MERCEDES-BENZ Transmission Mount / Engine Mount for Mercedes-Benz Vito W638 (S-Class / SL / SLK Powertrain Variants)

Engine Mount for Mercedes-Benz Vito W638 (S-Class / SL / SLK Powertrain Variants)

OE Numbers:
6382411413

Compatible Models:
Mercedes-Benz Vito Bus / Box (W638)
Mercedes-Benz Vito 114 2.3 (638.134/638.194) [M111.978] 1996–2003

Contact Us
PREV：Engine Mount for Mercedes-Benz S-Class W221/C216, E-Class W211 AMG & SL R230 AMG NEXT：Engine Mount for Mercedes-Benz G-Class W463 (G500/G55 AMG/G63 AMG/G65 AMG)
  • Description
  • Advantages
  • Suitable For
  • Contact Us

This engine mount occupies the chassis-side mounting position on the Mercedes-Benz Vito W638, working in conjunction with LJ-502 to fully isolate the engine from the van body structure. The Vito 638 is a unibody vehicle where effective engine isolation is particularly important, as vibration paths through the monocoque are shorter and more direct than in body-on-frame commercial vehicles.

The W638's M111 petrol and OM611 CDI engines both benefit from properly functioning engine mounts: the M111's high-revving character generates vibration at a different frequency to the CDI's low-speed torque pulses, and the shared mount geometry must accommodate both. This part uses a rubber compound hardness specification matched to the Vito W638's measured engine torque range.

Completes engine mount renewal when paired with LJ-502
Reduces body-structure resonance characteristic of high-mileage W638 vans
Prevents progressive engine movement that misaligns CDI injection system components
Competitively priced maintenance part for ageing W638 fleet operators

Chassis-side mounting position — pairs with LJ-502 for complete W638 renewal
Compatible with M111.978 petrol and OM611 CDI diesel powertrains
Single OE reference simplifies W638 engine mount identification
Calibrated rubber hardness for W638 Vito combined duty cycle

Recommended Products

Business For 17 Years
ABOUT LIANJUN
Anhui Lianjun Rubber Technology Co., LTD., formerly Wenzhou Lianjun Vehicle Parts Co., LTD., was founded in 2009, referred to as "Lianjun Rubber". Lianjun Rubber is located in Ningguo city, Anhui province—automobile NVH rubber damper production base, the factory covers an area of 13,000 square meters, close to Hangzhou city (less than 100km).Lianjun Rubber focusing on NVH rubber damper elements of R&D, manufacturing and sales for Mercedes-Benz and BMW chassis systems. Its main products are Engine mounts, Drive shaft support bearing, Transmission mounts, Support drive shaft, Sturt mounts, Bushing and other series of auto rubber material products, nearly 1000 specifications. Lianjun Rubber is committed...
MORE ABOUT US
  • AREA
    0

    Established in 2009

  • AREA
    0㎡

    Floor area

  • HAVE
    0

    Product Specifications

V I E W  V I D E O
Certificate Of Honor
News
MERCEDES-BENZ Transmission Mount Industry knowledge