Transmission Mount for BMW 5/7 Series (E39/E38/E65/E66) and ALPINA

Home / Products / Transmission Mount / BMW Transmission Mount / Transmission Mount for BMW 5/7 Series (E39/E38/E65/E66) and ALPINA

Transmission Mount for BMW 5/7 Series (E39/E38/E65/E66) and ALPINA

OE Numbers:
22316771130
22321092897

Compatible Models:
BMW / ALPINA
BMW 5 Series (E39) [1995.11 - 2003.06]
BMW 5 Series Touring (E39) [1997.01 - 2004.05]
BMW 7 Series (E38) [1994.10 - 2001.11]
BMW 7 Series (E65 / E66 / E67)
BMW Z8 (E52) [2000.06 - 2003.06]
ALPINA B7 (E65)
ALPINA ROADSTER (Z8)
7 Series (E38) 740i / 740iL [1996.02 - 2001.07]
7 Series (E65) 735i / 735Li [2001.11 - 2004.12]
7 Series (E65) 740i / 740Li [2005.03 - 2008.08]
7 Series (E65) 745i / 745Li [2001.07 - 2005.03]
7 Series (E65) 750i / 750Li [2005.03 - 2008.08]

Key Dimensions:
Length: 34 / 70 mm
Outer Diameter: 36 / 46 / 50 mm
External Thread: M8 x 1.25

Contact Us
PREV：Engine Mount for BMW 5 Series Touring (E34) NEXT：Transmission Mount for BMW 5/6 Series (E60/E61/E63/E64)
  • Description
  • Advantages
  • Suitable For
  • Contact Us

Transmission mount for BMW 5/7 Series (E39 / E38 / E65 / E66) and ALPINA, covering the mount crossmember position common to the late E-series and early F-chassis BMW and ALPINA derivatives. Mount dimensions (34/70 mm length, 36/46/50 mm OD, M8 stud) reflect the range of crossmember variants used across this wide vehicle family.

• ALPINA B7 rated: Rubber load capacity covers the higher output of ALPINA's retuned engines on the E65 platform
• E65 / E66 platform compatibility: Mount geometry updated versus the E38 item to suit the revised crossmember on the 7-series redesign
• Z8 compatibility: Confirmed fitment to the E52 roadster transmission crossmember
• Three OD sizes within family: 36, 46, and 50 mm OD variants accommodate three distinct crossmember bore dimensions across this vehicle range
• Long-body option (70 mm): Spans the deeper crossmember section used on E65 / E66 long-wheelbase 7-series

• Single cross-reference covers multiple chassis codes, benefiting specialists maintaining a mixed late-E / ALPINA fleet
• Correct for the 3.0 L, 4.0 L, and 4.4 L petrol variants across E39, E38, E65, and Z8
• Resolves the low-speed torque converter lock-up vibration common on high-mileage E38 and E39 automatics
• Prevents propshaft flange contact with the tunnel floor on E65 long-wheelbase variants with sagged mounts
• Available as a rubber replacement element for the existing crossmember, avoiding a full bracket assembly cost

Recommended Products

Business For 17 Years
ABOUT LIANJUN
Anhui Lianjun Rubber Technology Co., LTD., formerly Wenzhou Lianjun Vehicle Parts Co., LTD., was founded in 2009, referred to as "Lianjun Rubber". Lianjun Rubber is located in Ningguo city, Anhui province—automobile NVH rubber damper production base, the factory covers an area of 13,000 square meters, close to Hangzhou city (less than 100km).Lianjun Rubber focusing on NVH rubber damper elements of R&D, manufacturing and sales for Mercedes-Benz and BMW chassis systems. Its main products are Engine mounts, Drive shaft support bearing, Transmission mounts, Support drive shaft, Sturt mounts, Bushing and other series of auto rubber material products, nearly 1000 specifications. Lianjun Rubber is committed...
MORE ABOUT US
  • AREA
    0

    Established in 2009

  • AREA
    0㎡

    Floor area

  • HAVE
    0

    Product Specifications

V I E W  V I D E O
Certificate Of Honor
News
BMW Transmission Mount Industry knowledge