0
Established in 2009
1693230965 Mercedes-Benz W638 Vito Control Arm Bushing Wheel Suspension Open Type
OE Numbers:
1693230965
Applicable Models:
Mercedes-Benz
Platform:
W638
Model Range:
VITO Bus (W638)
VITO Box (W638)
- Description
- Advantages
- Contact Us
This control arm bushing is designed for Mercedes-Benz Vito W638 platform vehicles, applied within the wheel suspension system. It serves as a pivot interface between the control arm and the chassis subframe, maintaining geometry and supporting controlled wheel movement during operation. The open-type design allows installation with reduced disassembly effort.
Manufactured from rubber material with stable elasticity, the bushing maintains consistent performance under repeated load and vibration conditions. It helps isolate road noise and vibration transmitted through the suspension linkage, contributing to improved driving stability and cabin comfort.
Produced to OE standards, this wheel suspension bushing ensures accurate fitment within the W638 control arm assembly and reliable performance under different load and road conditions.
Recommended Products
-
Auto Parts Drive Shaft Rubber Center Bearing for Mercedes-Benz T1/T2 Series
-
Drive Axle Support Bearing for Mercedes-Benz 190 (W201)
-
Drive Shaft Support Bearing for MERCEDES-BENZ E-Class W210 & S210
-
Drive shaft center support bearing for Mercedes-Benz C-class W202 & S202
-
Drive shaft support bearing for MERCEDES SPRINTER2-t bus/3t/4t and VW LT 28-46 II
-
Driveshaft support bearing for Mercedes-Benz and VW commercial vehicles
-
Mercedes Benz viano vito W639 drive shaft mount bearing
-
Mercedes Viano W639 driveshaft support bearing replacement part
-
Mercedes-Benz W203/S203 universal drive shaft support bearing
-
Mercedes-Benz C-Class / SL-Class Full vehicle series drive shaft support bearing
-
Mercedes-Benz A124 C124 W126 series drive shaft bridge bearing
-
Mercedes-Benz T2/LN1/LK/LN2 series rubber drive shaft center support bearing
Business For 17 Years
ABOUT LIANJUN
Anhui Lianjun Rubber Technology Co., LTD., formerly Wenzhou Lianjun Vehicle Parts Co., LTD., was founded
in 2009, referred to as "Lianjun Rubber". Lianjun Rubber is located in Ningguo city, Anhui
province—automobile NVH rubber damper production base, the factory covers an area of 13,000 square
meters, close to Hangzhou city (less than 100km).Lianjun Rubber focusing on NVH rubber damper elements
of R&D, manufacturing and sales for Mercedes-Benz and BMW chassis systems. Its main products are Engine
mounts, Drive shaft support bearing, Transmission mounts, Support drive shaft, Sturt mounts, Bushing and
other series of auto rubber material products, nearly 1000 specifications. Lianjun Rubber is
committed...
MORE ABOUT US
-
AREA
-
AREA0㎡
Floor area
-
HAVE0
Product Specifications
Certificate Of Honor
News
-
According to its usage location, it can be divided into seven categories: engine series, drive device, control device, front and rear suspension, vehicle body, exhaust system, and other systems. Its m...
-
The BMW chassis system consists of three main parts: lateral (steering), longitudinal (braking), and vertical (suspension), which are coordinated and controlled by the SAM module. At the same time, th...
Stabilizer Bushing Industry knowledge
If you are interested in our products, please consult us
CONTACT DETAILS
- Address : Yihuang line, Ningguo Economic and Technological Development Zone. Xuancheng City,Anhui Province.
- Fax : +86 13906874997
- Tel: +86-15856310524
- Email: [email protected]
PRODUCTS
QUICK LINK
NEWS CENTER
MOBILE TERMINAL
Copyright © ANHUI LIANJUN RUBBER TECHNOLOGY CO., LTD.
All Rights Reserved.
