Manual Transmission Mount (Left) for Mercedes-Benz A-Class / B-Class (W169/W245)

Home / Products / Transmission Mount / MERCEDES-BENZ Transmission Mount / Manual Transmission Mount (Left) for Mercedes-Benz A-Class / B-Class (W169/W245)

Manual Transmission Mount (Left) for Mercedes-Benz A-Class / B-Class (W169/W245)

OE Numbers:
1692400518
1692401218

Compatible Models:
Mercedes-Benz
A-Class (W169)
B-Class (W245)

Key Dimensions:
Width: 115 mm
Thickness: 85 mm
Outer Length: 115 mm
Position: Left

Contact Us
PREV：Transmission Mount for Mercedes-Benz C-Class W205 & E-Class W213 (2013–2018) NEXT：Air Filter Housing Bracket for Mercedes-Benz S-Class W140 (300SE/S320)
  • Description
  • Advantages
  • Suitable For
  • Contact Us

Left-hand manual transmission mount for Mercedes-Benz A-Class (W169) and B-Class (W245). Positions and restrains the CVT or manual gearbox on the driver's side, absorbing the reaction torque that would otherwise feed back into the body through hard metal contact.

• Asymmetric load geometry: Left-hand bracket profile offsets the mount centre to match the gearbox lug position on W169 / W245
• High-damping rubber grade: Tuned to attenuate the lower-frequency vibration signature of manual and CVT units
• Captive nut inserts: Factory-installed steel nuts in the bracket simplify installation and prevent thread stripping
• 115 × 115 × 85 mm envelope: Meets the OEM space claim within the tight A-Class engine bay
• Chemical barrier coating: Bracket surface resists brake-fluid and coolant splash common near the gearbox

• Eliminates transmission knock: Correctly positioned gearbox cannot strike the sub-frame under aggressive shifts
• Specified left-hand position: Ensures correct load path; right-hand mount (LJ-851) handles the complementary side
• Maintains precise selector cable geometry for accurate gear selection feel
• Prevents premature wear on gearbox output shaft seals caused by mount-induced misalignment
• Reduces floor pan resonance during urban stop-start driving cycles

Recommended Products

Business For 17 Years
ABOUT LIANJUN
Anhui Lianjun Rubber Technology Co., LTD., formerly Wenzhou Lianjun Vehicle Parts Co., LTD., was founded in 2009, referred to as "Lianjun Rubber". Lianjun Rubber is located in Ningguo city, Anhui province—automobile NVH rubber damper production base, the factory covers an area of 13,000 square meters, close to Hangzhou city (less than 100km).Lianjun Rubber focusing on NVH rubber damper elements of R&D, manufacturing and sales for Mercedes-Benz and BMW chassis systems. Its main products are Engine mounts, Drive shaft support bearing, Transmission mounts, Support drive shaft, Sturt mounts, Bushing and other series of auto rubber material products, nearly 1000 specifications. Lianjun Rubber is committed...
MORE ABOUT US
  • AREA
    0

    Established in 2009

  • AREA
    0㎡

    Floor area

  • HAVE
    0

    Product Specifications

V I E W  V I D E O
Certificate Of Honor
News
MERCEDES-BENZ Transmission Mount Industry knowledge