Engine Mount for Mercedes-Benz A-Class / B-Class (W169/W245)

Home / Products / Transmission Mount / MERCEDES-BENZ Transmission Mount / Engine Mount for Mercedes-Benz A-Class / B-Class (W169/W245)

Engine Mount for Mercedes-Benz A-Class / B-Class (W169/W245)

OE Numbers:
1692400717 | A1692400717
1692401417 | A1692401417

Compatible Models:
Mercedes-Benz
A-Class (W169)
B-Class (W245)

Key Dimensions:
Length: 135 mm
Width: 85 mm
Thickness: 78 mm

Contact Us
PREV：Rubber Metal Engine Bracket for Mercedes-Benz A-Class (W168) A160 NEXT：Engine Mount for Mercedes-Benz A-Class / B-Class (W169/W245)
  • Description
  • Advantages
  • Suitable For
  • Contact Us

Engine mount for Mercedes-Benz A-Class (W169) and B-Class (W245), providing primary support on the gearbox side of the engine assembly. At 135 × 85 × 78 mm, it matches the OEM envelope and carries the vertical and lateral loads generated by the transversely mounted four-cylinder unit.

• High-load rubber formulation: Engineered to handle the elevated torque reaction of the W169 / W245 front-drive layout
• Moulded-in metal sleeves: Prevent bush deformation at bolt-down torque, preserving correct preload
• Three-axis load tolerance: Handles simultaneous vertical, lateral, and fore-aft inputs without creep
• Anti-fatigue bonding agent: Resists rubber-to-metal delamination under cyclic stress
• Dimensional accuracy: 135 × 85 × 78 mm verified against OEM drawing tolerances

• Restores correct engine height: Prevents driveshaft CV joint from running at excessive angle
• Reduces gear-change shudder: Damps the torque spike at clutch engagement on manual variants
• Suitable for both petrol and diesel engine versions of the W169 / W245 platform
• Direct replacement requiring no adapter brackets or spacers
• Extends adjacent component life by preventing excessive powertrain displacement

Recommended Products

Business For 17 Years
ABOUT LIANJUN
Anhui Lianjun Rubber Technology Co., LTD., formerly Wenzhou Lianjun Vehicle Parts Co., LTD., was founded in 2009, referred to as "Lianjun Rubber". Lianjun Rubber is located in Ningguo city, Anhui province—automobile NVH rubber damper production base, the factory covers an area of 13,000 square meters, close to Hangzhou city (less than 100km).Lianjun Rubber focusing on NVH rubber damper elements of R&D, manufacturing and sales for Mercedes-Benz and BMW chassis systems. Its main products are Engine mounts, Drive shaft support bearing, Transmission mounts, Support drive shaft, Sturt mounts, Bushing and other series of auto rubber material products, nearly 1000 specifications. Lianjun Rubber is committed...
MORE ABOUT US
  • AREA
    0

    Established in 2009

  • AREA
    0㎡

    Floor area

  • HAVE
    0

    Product Specifications

V I E W  V I D E O
Certificate Of Honor
News
MERCEDES-BENZ Transmission Mount Industry knowledge