Automatic Transmission Mount for Mercedes-Benz S-Class (W222) S500L

Home / Products / Transmission Mount / MERCEDES-BENZ Transmission Mount / Automatic Transmission Mount for Mercedes-Benz S-Class (W222) S500L

Automatic Transmission Mount for Mercedes-Benz S-Class (W222) S500L

OE Numbers:
2222403318 | A2222403318

Compatible Models:
Mercedes-Benz
S-Class (W222)
S500L 4.7L

Contact Us
PREV：Automatic Transmission Mount for Mercedes-Benz C-Class / E-Class (W204/W212) NEXT：Radiator Support Rubber Bracket for Mercedes-Benz
  • Description
  • Advantages
  • Suitable For
  • Contact Us

Automatic transmission mount for the Mercedes-Benz S-Class (W222) S500L, supporting the 7G-Tronic Plus automatic gearbox within the long-wheelbase platform. The mount must manage the heightened expectations of S-Class NVH targets while carrying the load of the full-size V8 drivetrain.

• S-Class NVH specification rubber: Softer isolation compliance tuned to the low-vibration requirements of the W222 chassis
• Long-wheelbase calibration: Mount stiffness accounts for the extended propshaft and additional torque pulse timing of the S500L
• Precision-ground metal face: Mating faces machined flat to prevent micro-gap at the crossmember that would allow fretting corrosion
• High-cycle fatigue resistance: Rubber compound tested to survive the high annual mileage typical of executive-class vehicles
• Corrosion-inhibited fastener threads: Insert threads treated to prevent galling during future service removal

• Maintains the refined NVH floor expected in the W222 cabin
• Supports the 4.7 L biturbo V8 mass without creep or slump over time
• Preserves correct propshaft phasing on the long-wheelbase platform, avoiding driveline vibration
• Eliminates the low-frequency groan from the transmission tunnel area reported on mounts with compression set
• Suitable for both standard and AMG-line S500L variants with the 7G-Tronic Plus gearbox

Recommended Products

Business For 17 Years
ABOUT LIANJUN
Anhui Lianjun Rubber Technology Co., LTD., formerly Wenzhou Lianjun Vehicle Parts Co., LTD., was founded in 2009, referred to as "Lianjun Rubber". Lianjun Rubber is located in Ningguo city, Anhui province—automobile NVH rubber damper production base, the factory covers an area of 13,000 square meters, close to Hangzhou city (less than 100km).Lianjun Rubber focusing on NVH rubber damper elements of R&D, manufacturing and sales for Mercedes-Benz and BMW chassis systems. Its main products are Engine mounts, Drive shaft support bearing, Transmission mounts, Support drive shaft, Sturt mounts, Bushing and other series of auto rubber material products, nearly 1000 specifications. Lianjun Rubber is committed...
MORE ABOUT US
  • AREA
    0

    Established in 2009

  • AREA
    0㎡

    Floor area

  • HAVE
    0

    Product Specifications

V I E W  V I D E O
Certificate Of Honor
News
MERCEDES-BENZ Transmission Mount Industry knowledge